View 1116581-3_4585225.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Quick Reference Guide: AMP Pivot Connector Series
The AMP Pivot Connector Series is a toolless, user friendly solution for terminating signal and low power connections. Simply feed a pair of unstripped wires into the connector and complete the termination by pressing down the pivoting stuffer with your thumb or index finger. Insulation displacement contacts (IDCs) in the connector eliminate the need for stripping wires and make the termination even easier. This series is ideal for field-installed products and space constrained applications. There are two versions available depending on the size and requirements of the application. Tyco Electronics offers pivot and pivot II connectors with varying dimensions. Please see the charts inside to differentiate pivot from pivot II and find the connector that is right for your application.
FEATURES AND BENEFITS
* Eliminates need for a termination tool--just use your finger! * Small size and toolless capability make it suitable for space constrained applications. * Terminate wires from either side of the connector or pass wires completely through for bridging connections. * Perfect for field-installed products--IDCs eliminate the need to strip wires.
PRODUCT APPLICATIONS
* Space-constrained applications * Garage door openers * Sprinkler systems * Alarm systems * Telephone jacks * Pet fences * Low voltage lighting
http://www.tycoelectronics.com/products/pivot
AMP Pivot Connector Series
HOW TO USE AN AMP PIVOT CONNECTOR
Wire Insertion After the connector has been applied to the pc board, the unstripped wires may be inserted into the corresponding wire insertion hold of the stuffer. Termination While holding the wires firmly in place, push down on the stuffer until it bottoms to terminate the wire.
DRAWINGS FOR AMP PIVOT CONNECTORS
WIRE 22-24 AWG DIM B WIRE 22-24 AWG
DIM A
DIM C STUFFER MARKING .093 .433 .420
.093
One Pair Pivot Connector Top view of a one pair, single entry pivot connector in a closed position. Drawing shows connector width.
Closed Position Side view of a one pair, single entry pivot connector in a closed position. Drawing shows a wire fed into the connector, the connector height, stuffer length and tine length.
Open Position Side view of a one pair, single entry pivot connector in an open position. Drawing shows connector height and height when the stuffer is open.
AMP PIVOT CONNECTORS
PIVOT Part # # OF PAIRS 1 1 2 2 2 2 4 4 ENTRY STYLE SINGLE SINGLE SINGLE SINGLE SINGLE SINGLE SINGLE SINGLE STUFFER LENGTH SHORT SHORT SHORT SHORT SHORT SHORT SHORT SHORT STUFFER MARKING T/R T/R T/R 1/4 T/R 1/4 T/R T/R DIM A DIM B DIM C AWG INSULATION DIAMETER .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 STUFFER COLOR CLEAR CLEAR CLEAR CLEAR CLEAR CLEAR CLEAR CLEAR
1116477-3 1116477-4* 1116161-5 1116161-6 1116161-7* 1116161-8* 1116581-3 1116581-4*
.430 .430 .820 .820 .820 .820 1.60 1.60
.595 .595 .595 .595 .595 .595 .595 .595
.599 .599 .599 .599 .599 .599 .599 .599
22-24 22-24 22-24 22-24 22-24 22-24 22-24 22-24
Product Specification: Application Specification: Qualification Test:
108-1657 114-6062 501-373
* Signifies part is grease filled T/R is an abbreviation for Tip & Ring
(Commonly used when talking about phone lines in the telecommunications industry)
All part numbers are RoHS compliant.
http://www.tycoelectronics.com/products/pivot
2
AMP Pivot Connector Series
DRAWINGS FOR AMP PIVOT II CONNECTORS
WIRE 22-26 AWG WIRE 22-26 AWG DIM B DIM C STUFFER MARKING
DIM A
.410
.105
.105
One Pair Pivot Connector Top view of a one pair, single entry pivot II connector in a closed position. Drawing shows connector width.
Closed Position Side view of a one pair, single entry pivot II connector in a closed position. Drawing shows a wire fed through the connector, the connector height, stuffer length and tine length.
Open Position Side view of a one pair, single entry pivot II connector in an open position. Drawing shows connector height and height when the stuffer is open.
AMP PIVOT II CONNECTORS
PIVOT II Part # 1339222-2 1339394-1 1339345-1 1339342-1 1339313-1 1339395-1 1-1339395-1 1658921-1 1339374-1 1339374-2 1339343-1 1339376-1 1339376-2 1339376-3 1339396-1 1368385-1 1339344-1 1339312-1 1339375-1 1339375-2 # OF ENTRY PAIRS STYLE 1 1 1 1 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 SINGLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE SINGLE SINGLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE 108-1657-2 114-6062 501-373-2 STUFFER LENGTH SHORT SHORT SHORT SHORT SHORT SHORT SHORT SHORT SHORT SHORT SHORT LONG LONG LONG SHORT SHORT SHORT SHORT SHORT SHORT STUFFER MARKING T/R BLANK HOT/GND BLANK HOT/GND HOT/GND HOT/GND T/R T/R T/R HOT/GND BLANK BLANK BLANK T/R Custom Mark BLANK HOT/GND T/R T/R DIM A 0.39 0.39 0.39 0.39 0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.78 1.56 1.56 1.56 1.56 1.56 1.56 1.56 1.56 DIM B 0.645 0.645 0.645 0.645 0.645 0.645 0.645 0.645 0.645 0.645 0.645 0.824 0.824 0.824 0.645 0.645 0.645 0.645 0.645 0.645 DIM C 0.788 0.788 0.799 0.799 0.799 0.788 0.788 0.799 0.799 0.799 0.799 0.978 0.978 0.978 0.788 0.788 0.799 0.799 0.799 0.799 AWG 22-26 22-26 22-26 22-26 22-26 22-26 22-26 22-26 22-26 22-26 22-26 22-26 22-26 22-26 22-26 22-26 22-26 22-26 22-26 22-26 INSULATION DIAMETER .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 .06-.04 STUFFER COLOR CLEAR TAN BLACK RED BLACK TAN TAN CLEAR CLEAR BLACK RED CLEAR CLEAR WHITE TAN Custom RED BLACK CLEAR BLACK
AMP PIVOT CONNECTORS
Product Spec: Application Spec: Qualification Test:
T/R is an abbreviation for Tip & Ring
(Commonly used when talking about phone lines in the telecommunications industry)
All part numbers are RoHS compliant.
http://www.tycoelectronics.com/products/pivot
3
AMP Pivot Connector Series
QUESTIONS TO ASK AT DESIGN IN
* What wire gauge are you using? Pivot series can accept AWG 22~24. Pivot II series can accept AWG 22~26. * Will the wire need to be passed through the connector? If no, single or double entry styles will work. If yes, only double entry style will work. * In what type of environments will this connector be used? These connectors are available to be greased filled in order to be used in extreme environments. (See part number table on previous pages.) * What is the significance of the Stuffer Labels `T and R'? T and R stand for Tip and Ring, which is commonly used terminology when working with telephone jacks in the telecommunications industry. * What tooling is required to support these connectors? No tooling is needed to support these connectors other than something to cut the wires to the appropriate sizes. The IDC contacts make pivot a toolless solution. * What if you need to use an AWG that is outside the AMP Pivot Connector Series gauge? We recommend using the terminal block family, which can accept AWG 12~30. For more information please see the landing page at www.tycoelectronics.com/products/terminalblocks * How many wires can a single connector use? We offer one, two and four pair connectors. Each pair is capable of accommodating two wires and multiple connectors can be aligned side-by-side.
YOU ARE HERE (E-CATALOG)
Product Overview Page http://tycoelectronics.com/products/pivot Breakdown From Main Page
TYCOELECTRONICS.COM
CONNECTORS
DISCRETE WIRE
SPECIALTY
PIVOT
Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Please consult Tyco Electronics for the latest dimensions and design specifications.
Restriction on the use of Hazardous Substances (RoHS)
At Tyco Electronics, we're ready to support your RoHS requirements. We've assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers where any change was required to eliminate the restricted materials. Part numbers in this catalog are identified as: RoHS Compliant -- Part numbers in this catalog are RoHS Compliant, unless marked otherwise. These products comply with European Union Directive 2002/95/EC as amended 1 January 2006 that restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in certain electrical and electronic products sold into the EU as of 1 July 2006. NOTE: For purposes of this Catalog, included within the definition of RoHS Compliant are products that are clearly "Out of Scope" of the RoHS Directive such as hand tools and other non-electrical accessories. NOTE: Information regarding RoHS compliance is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information provided by our suppliers. This information is subject to change. For latest compliance status, refer to our website referenced at right.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed information. You can also submit RoHS questions and receive a response within 24 hours during a normal work week. The Support Center also provides: Cross-Reference from Non-compliant to Compliant Products Ability to browse RoHS Compliant Products in our on-line catalog Downloadable Technical Data Customer Information Presentation More detailed information regarding the definitions used above So whatever your questions when it comes to RoHS, we've got the answers at www.tycoelectronics.com/leadfree
RoHS
Customer Support Center
(c) 2009 Tyco Electronics Corporation. All Rights Reserved. AMP, TE LOGO, and TYCO ELECTRONICS are trademarks. Other products, logos and company names mentioned herein may be trademarks of their respective owners. Dimensions are in millimeters with inches (if shown) in brackets. Specifications subject to change. For more information, contact your Tyco Electronics sales engineer at the numbers listed below, or visit our Website at: http://www.tycoelectronics.com. USA: 1-800-522-6752 S. America: 55-11-2103-6000 France: 33-1-3420-8686 Canada: 1-905-470-4425 Germany: 49-6251-133-1999 Netherlands: 31-73-6246-999 Mexico & C. America: 52-55-1106-0814 UK: 31-73-6246-431 China: 86-400-820-6015 5-1773454-9-1K-CIS-AH-04/09

▲Up To Search▲

Price & Availability of 1116581-3

	To Download 1116581-3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .